เครื่องอัดฉีดน้ำแรงดันสูง รุ่น High flow 2500 SUMO
High Pressure Washer Mod.High flow 2500
เครื่องอัดฉีดน้ำแรงดันสูง
เครื่องอัดฉีดน้ำแรงดันสูง High flow 2500
High pressure washer High flow 2500
เหมาสำหรับ (Suitable for)
-
เครื่องอัดฉีดน้ำแรงดันสูง เหมาะสำหรับทุกงานทำความสะอาด งานอุตสหกรรม ลูกสูบเคลือบเซรามิค ช่วยให้มั่นใจในการใช้งานที่ยาวนาน ทนทานแข็งแรง ฝาครอบสามารถเปิดออกได้กว้าง เพื่อการบำรุงรักษาที่ง่ายดาย เคลื่อนย้ายสะดวก ด้วยล้อขนาดใหญ่ และมือจับสำหรับเข็น
-
High-pressure washer heavy duty model, can adjustable the pressure, come with 4 pcs of nozzle for different area, suitable for all cleaning occasions, high flow rate up to 16 l/min. Ceramic coated pistons ensure long service intervals. Wide-opening machine cover for easy access to all service and maintenance-relevant components. Large wheels and ergonomic push handle easy handling.
อุปกรณ์มาตรฐาน (Standard accessories)
- ปืนฉีดน้ำท่อนกลางยาว 69.5 ซม.
- ปืนฉีดน้ำแรงดันสูง
- สายอัดฉีด 10 เมตร
- จุกจุ่มน้ำมัน
- สายดูดโฟมพร้อมหัวสำหรับฉีดโฟม
- ตัวกรองน้ำ
- สายดูดน้ำเข้าเครื่อง 2.5 เมตร
- หัวฉีดปรับองศา เบอร์ 050
- Length Extension Lance 69.5 cm
- High-pressure Gun
- High-pressure Hose 10 m
- Oil Dip Stopper
- Foam Suction Hose
- Water Filter
- Inlet Water Hose 2.5 m
- Nozzle 4 Pcs (No. 050)
วิธีการใช้งาน (How to use)
- เตรียมพื้นที่ที่จะทำความสะอาด
- ประกอบตัวเครื่องอัดฉีดน้ำแรงดันสูง และอุปกรณ์
- ต่อสายน้ำเข้าทางด้านจุดต่อน้ำเข้า อินเล็ท
- ต่อสายฉีดน้ำ + ปืนฉีดน้ำทางด้านจุดต่อน้ำออก เอ้าส์เล็ท
- เสียบปลั๊กเข้ากับปลั๊กไฟบ้าน เสร็จแล้วเปิดสวิตซ์พร้อมใช้งาน
- Prepare the workplace.
- Install the machine and accessories.
- Connect a garden hose into inlet side.
- Connect a high-pressure hose and a gun into outlet side.
- Connect plug with socket then turn on the switch, then the machine ready to use.
พื้นที่ใช้งาน (Application areas)
- การทำความสะอาดยานยนต์
- ทำความสะอาดพื้นที่ภายนอกอาคาร
- สถานที่ทำงาน
- สถานีบริการต่างๆ
- สระว่ายน้ำ
- Vehicle cleaning
- Cleaning of outside areas
- Workshop cleaning
- Service station cleaning
- Swimming pool cleaning
ข้อแนะนำ (Suggestion)
- ตรวจสอบสายไฟ และปลั๊กไฟ ว่าอยู่ในสภาพพร้อมใช้งาน
- Check the power cord with mains plug for damage before every use.
การบำรุงรักษา (Maintenance)
- ก่อนการทำความสะอาดและบำรุงรักษา เครื่องอัดฉีดน้ำแรงดันสูง และการเปลี่ยนซ่อมชิ้นส่วน ต้องปิดสวิตช์ทุกครั้ง
- ทำความสะอาดที่กรองทางน้ำเข้าทุกครั้งหลังใช้งาน เพื่อป้องกันการอุดตัน
- เก็บในที่ร่ม เพื่ออายุการใช้งานยาวนาน
- Switch off the appliance and in case of appliances connected to the mains, pull out the power cord before cleaning and performing any maintenance tasks on the machine.
- Clean the inlet filter after each use.
- Store in a cool dry place away from direct sunlight.
ปัญหาที่เกิดขึ้น
- สวิตซ์เด้งขึ้น แสดงว่าไฟไม่พอ 220V หรือ สายไฟเบอร์เล็กเกินไป เลยเกิดปัญหา ไฟไม่พอเลี้ยงมอเตอร์
- สวิตซ์ที่ไม่เด้ง เพราะว่าใช้สายไฟที่มีขนาด 2x2.5 หรือ 3x2.5 ขึ้นไป ทำให้มอเตอร์ทำงานได้อย่างปกติ
คำเตือน (Warning)
- สายฉีดน้ำที่กำลังทำงานมีแรงดันสูงอาจก่อให้เกิดอันตรายได้ ถ้าใช้ไม่ถูกวิธี ห้ามหันสายฉีดน้ำไปที่คน สัตว์ อุปกรณ์ไฟฟ้าที่กำลังทำงาน หรือหันเข้าหาตัวเครื่องยนต์
- อ่านคำเตือนเพื่อความปลอดภัยและคำแนะนำทั้งหมด การไม่ปฏิบัติตามคำเตือนและคำแนะนำ อาจเป็นสาเหตุให้ถูกไฟฟ้าดูด เกิดไฟไหม้หรือได้รับบาดเจ็บอย่างร้ายแรง
- ไม่ควรฉีดน้ำใส่ตัวเครื่องเพราะอาจทำให้เครื่องเกิดการช็อตขึ้นได้
- High-pressure jets can be dangerous if improperly used. The jet may not be directed at persons, animals, live electrical equipment or at the appliance itself.
- Read all safety warnings and instructions. Non-compliance with warnings and recommendations may cause electric shock, fire, or serious injury.
- Do not spray water on the device as this may cause electric shock.
ข้อมูลทางเทคนิค
ขนาดแรงดันน้ำสูงสุด | 90 บาร์ |
แรงดันขณะทำงาน | 60 บาร์ |
อัตราการไหลของน้ำสูงสุด | 16 ลิตร/นาที |
อัตราการไหลของน้ำขณะทำงาน | 12 ลิตร/นาที |
กำลังมอเตอร์ | 2,500 วัตต์ |
กำลังไฟฟ้า | 1 เฟส / 220 โวลต์ / 50 เฮิร์ท |
ความเร็วมอเตอร์ | 2850 รอบ/นาที |
ชนิดของมอเตอร์ | 2 Pole |
น้ำหนักเครื่อง/น้ำหนักรวม | 32/36 กิโลกรัม |
ขนาดกล่อง | 60 x 43 x 48 ซม. |
ขนาดเครื่องอัดฉีด | 52 x 42 x 81 ซม. |
Technical data
Max. pressure | 90 bar |
Working pressure | 70 bar |
Max. flow rate | 16 L/min |
Working flor rate | 12 L/min |
Motor | 2,500 W |
Power | 1 phase / 220V / 50Hz |
Motor speed | 2850 RPM |
Moter type | 2 Pole |
Net weight/Gross weight | 32/36 kg |
Carton size | 60 x 43 x 48 cm |
Machine size | 52 x 42 x 81 cm |